A good quality pair of hair shears is what makes any haircut look great. Many of us like to change our look from time to time, from short hair to a Mohawk, from a Mullet cut to long hair, etc. To achieve any of these hairstyles, proper haircutting is necessary and that can be only achieved with the help of professional hair shears.
Hair scissors are professional haircutting shears which help in cutting hair smoothly and achieving any desired style. Whether you are a professional hairstylist or enjoy cutting hair at home, you’ll need effective barbering tools. Some people have fragile hair and selecting wrong hair shears can do more harm than help. Therefore it is very essential to use good quality haircutting tools.
There are different types of haircutting scissors like Kasho Scissors, Yoko Scissors, Thinning Shears, Lefty Scissors, etc. To choose the best hair shear for your haircut, you should analyze your needs. If you want to go from long hair to a short hairstyle, you need a scissor which is sharp and Yoko Scissors can do the job for you. If you wish to remove bulk from your hair, you should opt for chunking shears.
While choosing hairdressing scissors, quality is an important factor. Always make sure that you buy only good quality hair scissors. The ones that are made from premium quality of steel are highly durable and comfortable.
ScissorBoy hair shears are made from Japanese Hitachi steel that has a rockwell hardness of 63 HRC. This means that it will hold a sharper edge longer than the majority of shears on the market. These hair scissors have beautifully hand crafted handles that are designed to fit your hand comfortably and ergonomically.
Some stylists prefer using other haircutting tools like clippers, razors or blades but haircutting with hair shears is the ultimate experience for any barber as it allows him to be creative. ScissorBoy hairdressing scissors are great for stylists who want to reduce, eliminate or prevent wrist pain, carpal tunnel or other repetitive strain injuries.
Haircutting with ScissorBoy hair shears is fast, ergonomic and fun. Any stylist would drop other barbering tools for such good quality hair scissors which guarantee a sexy haircut.
Victoria Beckham is sporting a new hairstyle, courtesy of Thinning Shears. Popularly known as Posh Spice, Victoria has grown up with a new shaggy bob hairdo that has become the most admired hairstyle in the last 48 hours.
The singer-turned-fashion-designer was seen with her family at the LA Lakers basketball game on Friday. Victoria Beckham showcased her soft new feminine hairdo with such aplomb that her bob haircut attracted more attention than Lakers game. Her new style is nice and fresh and I feel her stylists must have used thinning shears to get that shaggy bob.
Posh has been experimenting with a lot of hairstyles this year and the tousled style is her latest addition. I liked this one because it’s a much gentler version of her first bob, nicknamed the Pob. Even celebrity hairdresser Lee Stafford told the Daily Mail: ‘It’s nice to see her relax a little with her image.”
If you have ever cut your own hair, you may already be familiar with what thinning shears (also known as Thinners or Chunkers) are and what they can do for hair. If you’re not familiar with them, thinning shears are scissors that are used to thin and shape hair without altering the style. Thinners are great for those who need to thin down very thick or curly hair.
Posh’s hair was never curly but her choices included platinum blond crop and slick haircuts. One thing with Victoria’s hairstyles is that you get an impression that every style of her’s is meticulously thought out and planned. The current shaggy bob makes you feel as if she has gone for a big blow dry to give what an otherwise simple style a hint of glamor. The use of thinning shears adds more creativity and gives Victoria Beckham haircut bob a cool look.
Have you ever found it difficult or intimidating to use thinning shears on your clients hair? Did you even know it was possible to use thinning shears ONLY on a whole haircut? There are only a few stylists in the world who are able to do this, and Paulo Candido from Shear Genius Season 2 is one of those lucky few. It’s a lot simpler than you think, let me explain…
It might be difficult to phatom now, but one of the biggest problems stylists have when using thinning shears is that they use them too often throughout the haircut. If you look closely at the shears, they have teeth instead of blades. The purpose of thinning shears is to “thin” out a section of the hair that is thick, without altering the actual hairstyle.
Top stylist, Paulo Candido from Shear Genius, Season 2 works with 3 kinds of thinning shears, which are also referred to as texturing shears:
1. Notching scissors with a channel type blade, which are a 35T Texturizing Shear that produce a chunky texture.
3. A Dual Purpose 14T Thinning Shear which notches and thins at the same time, and is essentially a combination of the first two. This shear adds texture and reduces length simultaneously.
Paulo calls this his time saver shear in his Ego Mechanix Salon, as it allows him to do the whole haircut with just these.
The Halo Technique is essentially a wide band to the top of the head, and that creates a guideline for the whole haircut. Paulo uses a Beta Blade thinning shear which combines both weaving and texturizing blades into one.
To achieve that perfect Halo Technique in the video, its very important as we start that we have very clean sections. These sections are not small by any means, they are usually about 1″ wide. Next you split the hair in half across the center from ear to ear, and divide that into three sections in the front. The point is not to remove a lot of length, but rather to texturize it and breaks things up and get rid of the thickness instead.
Next he works with the rear of the head, starting in the middle section. He refers to these 3 sections in the rear, as if one were to peal an orange into wedgdes. As the wedges come together, the effect is a round shape. He divides each side of the head into *crescents* and goes to work. The exception is the top section or the flat of the crown. Generally people want a lot more volume in that section, and keeping this piece longer allows the overall curvature of the haircut to flow nicely towards the rear of the head and create more volume. To achieve this, pull the top part straight up and create a texture by positioning your thinning shears in a brick laying fashion. Brick laying is the even distribution of texture. Using this method, move on to the next middle part below and use the first part as a guide to establish the length and create texture at the same time. Do this for the other *crescent* and get both sections of the head.
Lastly we work down through the nape area. By retaining the length behind the ears and removing the bottom section out, not only will it allow to have more stregth in that area, but it will give the haircut a more a structured shape. To remove the very bottom start by establishing the length. Use your comb and position it by placing it naturally at the nape instead of combing downward and directing the hair, then put the blade right underneath the comb and create a little bit of texture. Rock that blade side to side and create more of a broken up softer edge so that you have more control. Its very important that you place that comb naturally instead of pulling the hair down, as when you pull it, the hair wants to go one way. But when you release it from the comb, it splits and goes the other way. The end result is a nice and soft yet broken up haircut.
Paulo points out something very important that a lot of people mess up when using these texturizing shears. You only want to be creating texture on about an inch or so of the ends of the hair, and no go too far deep into the interior of the hair. What ends up happening is that it ends up weaking the structure of where the ends want to go.
Stylists should learn to manage and use these shears after using them extensively on their clients and figure out exactly how they work and what they do for the client and the hair texture as well. The basic need at the end of the visit, is that the client usually wants a lot of volume in their haircut. Paulo Candido says, that he uses texturizing shears on *every* haircut. Now that’s Shear Genius!
To learn more about the best thinning shears for your hairstyling needs, check out theScissorBoy Storewebsite.
For More FREE videos on Texturizing Hair, cutting edge hair styles & Hairstyling in FULL length, please go and put in your name and email address below:
Texturizing Hair Using Thinning Shears is a great way of completing an otherwise unfinished haircut.
Emmanuel, a Master Stylist from Atelier Emmanuel Hair Salon in San Francisco, California shows how Fixing Layers with Texturizing using thinning shears can add life to a haircut.
To achieve this look, Emmanuel recommends you texturize at different angles (flat, angled, straight into the hair) using what he calls the Piquetage Technique. Use thinning shears to blend layers and create better flow. Check out the video again to see the correct angle he recommends to prevent cutting of too much hair and to see this technique in action. Piquetage should be used at the roots to give lift to the hair. The end effect is shorter hairs supporting the longer hair.
To finish off the cut, Emmanuel demonstrates a Finger Texture technique. Laying hair can create problems, and placing your fingers correctly on the hair helps to prevent that. If a problem does arise, you can fix layer issues with texturing techniques using thinning shears, razors and/or scissors. Be sure to carefully watch everything that you are doing, as sight is just as important as technique while styling.
To learn more about the best thinning shears for your hairstyling needs, check out the ScissorBoy website.
Some people get cars for their graduation, or computers, maybe money. One teen in Canada decided to cut her hair – for the first time ever, and we’re betting her hairstylist had to use some crazy thinning shears on her mane! With hair that long and thick, there’s no way regular shears would’ve done the job!
The graduate, Jennifer Greenland, thought it would be a good thing to do to mark the occasion and when Joanne Tetlichi, a custodian at the school heard of Jennifer’s plan, she decided she would cut her long hair as well. Add to that list, Kyla Ross – a worker at the school – who made the decision to cut her hair as well.
The women did some searching and decided they would donate their hair to a group in Alberta that makes wigs for cancer patients.
The wig makers require at least 10 inches of hair to make a wig. The three women each donated between one and two feet of hair.
The group even got to have their hair cut on the stage after the graduation ceremony – here’s where those thinning shears came in handy! – and several people walked around the room with buckets asking for donations towards cancer research.
You can read more about this somewhat unusual donation here
